Miele H 4050 BM - Manual (Page 37)

Fan run-on
You can select either a temperature or a
time controlled fan run-on. The fan will
then switch off automatically if the
temperature in the oven is 70 °C
(temperature controlled) or after
approx. 20 minutes (time controlled).
Start
Programmes can be started
automatically or manually. Microwave
programmes can only be started
manually. The automatic setting
enables the programme to start
automatically without having to select
Start. With the manual setting, you
have to select and confirm "Start".
Temperatures
You can alter the recommended
temperatures for Auto roast (160 °C),
Fan plus (160 °C) and Fan grill
(200 °C). You can also alter the
recommended temperatures for
combination programmes.
MW power levels
You can alter the recommended power
levels for solo programmes and for
combination programmes using
microwave heat.
Display
The display can be switched on or off:
If you select the setting "Display, on"
then the time of day will show in the
display even when the appliance is
switched off. If you select "Display on
for 60 seconds", then the display will go
out after 60 seconds.
You can also adjust the display contrast
and display brightness.
Buzzer tones
There is a choice of volume. The
"Melodies" option offers you different
sounds for the minute minder tone and
the cooking duration tone. This means
you will be able to differentiate between
the minute minder tone and the tone
which indicates that a programmed
cooking duration has finished if you are
using both at the same time.
The length of the tone can also be set
to allow you to differentiate between a
short and long tone.
Settings
37