Miele H 4050 BM - Manual (Page 73)

All electrical work should be carried out
by a competent person, in accordance
with national and local safety
regulations.
This appliance is supplied with a mains
cable and plug for connection to a 230
- 240 V, 50 Hz single phase supply.
The voltage and connected load are
given on the
data plate situated at the
front of the oven interior. Please ensure
that these match the household mains
supply.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
Connection for the appliance should be
made via a suitable isolator which
complies with national and local
regulations, and which is accessible
after the appliance has been built in.
Test marks
Electrical safety, C-Tick Mark
Electrically suppressed according to
AS/NZS 1044
WARNING
THIS APPLIANCE MUST BE
EARTHED
Electrical connection AUS, NZ
73