Motorola T1/E1 - Manual (Page 67)

Canopy T1/E1 Multiplexer September 2004
T1/E1 Multiplexer FPGA Version 3.4
Page 67 of 73
4 CANOPY T1/E1 MULTIPLEXER REFERENCE
INFORMATION
4.1 CLI COMMANDS TO GET STATUS INFORMATION
Desired Action Syntax, Response, and Description
Get Canopy-side
Ethernet auto-
negotiation Enter get canopy port auto negotiation
The system responds
Canopy port auto-negotiation is: [on/off]
Gets the auto-negotiation mode for the Canopy BH Ethernet port. If
auto negotiation is set to OFF, the port will be forced to 100 Mbps Full
Duplex.
Get LAN-side
Ethernet auto-
negotiation Enter get lan port auto negotiation
The system responds
LAN port auto-negotiation is: [on/off]
Get the auto-negotiation mode for the customer LAN Ethernet port. If
auto negotiation is set to OFF, the port will be forced to 100 Mbps Full
Duplex.
Get line type Enter get type
The system responds
Line type [T1/E1]
Gets the line type, either T1 or E1. All four ports have the same line
type.
Issue 3