Muratec MFX-3070 - Manual (Page 122)

122 • Printer settings in Mac OS X
Printer setup options
Printer options
Density
MFX-3070 MFX-3090
Select the density from Lightest (-2) to Darkest (+2) depending on the quality of the
original document.
Weight
Select the thickness or type of paper in the printer. It is important to set this correctly
as it affects the temperature at which the toner is fused to the paper. For example, if
you are printing on normal A4 paper, do not select Labels or Transparency as this may
cause toner smearing and paper jam.
Toner Save
Toner Save uses less toner when printing your document. This is best suited to draft
text documents as it lightens the print significantly.
Auto Tray Switch
If the printer runs out of paper in the current tray, the Auto Tray Switch automatically
changes to a tray that has the same type of paper and continues printing.
Paper size check
Select Paper Size check if you want the printer to warn you when the document paper
size is different from the paper in the printer.
A warning message is displayed and printing continues when you load the correct
paper in the paper tray and press START. When this option is deselected, the printer
uses the paper loaded in the selected tray regardless of the document size.