Muratec MFX-3070 - Manual (Page 30)

30 • Getting Started
Envelopes
Caution!
Envelopes should be free from twist, curl or other deformations. They
should also be of the rectangular flap type, with glue that remains intact
when subjected to hot roll pressure fusing used in this type of printer.
Window envelopes are not suitable.
Transparencies
Caution!
Do not use transparencies designed for use in color laser printers and
photocopiers.
Recommended type is CG3300 by 3M (A4 or Letter size).
Labels
Caution!
Labels should cover entire carrier sheet. The carrier sheet or adhesive
must not be exposed to any part of the printer.
Face Down Stacker
The face down stacker on the top of the MFP can hold up to 150 sheets of 64g/m²
standard paper and can handle paper stocks up to 120g/m². Pages printed in reading
order (page 1 first) will be sorted in reading order (last page on top, facing down).
Face Up Stacker
For the face up stacker, cover at the rear of the MFP should be opened when required
for use. In this condition paper will exit via this path, regardless of driver settings.
Always use this stacker and the multi purpose feeder for heavy paper stocks.
Duplex Unit
The duplex unit provides automatic two-sided printing on the same range of paper
sizes as tray 2 (i.e. all cassette sizes except A6), using paper stocks from 75-105g/
m².