Muratec MFX-3070 - Manual (Page 78)

78 • Operation
Copying
Note
Factory default setting is Copy mode.
Basic operation
1. Place your document(s) with text face Up in the ADF or face Down on the glass.
2. Set your copying options as required. For further details refer to the following
sections.
3. Then press the Start button.
Note
When using the ADF, in order to prevent paper jams, if you wish to
cancel the copy process, press the Stop button once to stop the process
and a second time to eject the paper.
Advanced operation
Using the options available, you can alter the copy output to suit your needs:
1. Press Enter button.
2. Select required parameter with Down arrow key and press Enter.
3. Pressing Up and Down arrow keys, select value and press Enter.