Muratec MFX-3070 - Manual (Page 139)

139 • Maintenance
4. Lift the right-hand end of the cartridge and then draw the cartridge to the right to
release the left-hand end as shown, and withdraw the toner cartridge out of the
MFP.
5. Put the cartridge down gently onto a piece of paper to prevent toner from
marking your furniture.
Caution!
The green image drum surface is very delicate and light sensitive. Do not
touch it and do not expose it to normal room light for more than 5 minutes.
If the toner cartridges need to be out of the MFP for longer than this, please
lower the top cover. Never expose the drum to direct sunlight or very bright
room lighting.
6. Remove the new cartridge from its box but leave its wrapping material in place
for the moment.
7. Gently shake the new cartridge from end to end several times to loosen and
distribute the toner evenly inside the cartridge.