Muratec MFX-3070 - Manual (Page 54)

54 • Configuring your machine
LEVEL 2 ITEM DESCRIPTION/OPTIONS
Access Control Enable/Disable
Power Save Time 1/5/15/30/60/120
minutes
Return to Stand-by Time 20/40/60/120/180
seconds
Default Mode Copy/Scan/Fax
Unit of Measure inch/mm
Date Format mm/dd/yyyy,
dd/mm/yyyy,
yyyy/mm/dd
Report Full Print On/Off
Panel Contrast -10~0~+10
System Setup
Near Life Status Enable/Disable
TCP/IP Enable/Disable
IP Version IPv4, IPv4 + IPv6,
IPv6
NetBEUI Enable/Disable
NetBIOS over TCP Enable/Disable
Ether Talk Enable/Disable
IP Address Set Auto/Manual
IPv4 Address xxx.xxx.xxx.xxx
Subnet Mask xxx.xxx.xxx.xxx
Gateway Address xxx.xxx.xxx.xxx
DNS Server Primary xxx.xxx.xxx.xxx
DNS Server Secondary xxx.xxx.xxx.xxx
WINS Server Primary xxx.xxx.xxx.xxx
WINS Server Secondary xxx.xxx.xxx.xxx
Web Enable/Disable
Telnet Enable/Disable
Admin
Setup
Network Menu Network Setup
FTP Enable/Disable