Muratec MFX-3070 - Manual (Page 133)

133 • Overlays and Macros (Windows only)
Create and download macros
1. From the Windows Start menu, start Storage Device Manager (SDM) and allow
SDM to discover the printer.
2. Choose Projects > New Project to start a new project.
3. Choose Projects > Filter Macro File. The Filter Printer Patterns dialog box
appears. Make any adjustments in the settings that you need and then click OK.
Example: If you create a black oval in MS Paint and leave all the color command
filters checked, the black oval will print as a black rectangle when the overlay is
used. To maintain the oval shape, turn off (deselect) the “Configure Image Data,”
“Palette ID” and “Palette Control” filters.
4. Set the Files of Type drop-down list to PRN Files(*.prn).
5. Navigate to the folder where the overlay .PRN files are stored and select one or
more of these to include in your overlay set.
You can have more than one macro file in a project. For example, one for top pages
and another for continuation pages. Use standard Windows techniques (Shift or
Ctrl keys) to select multiple files simultaneously if you need to.
6. Click Open to add these files to the current project. (You can also drag and drop
files from Windows Explorer directly into the project window if you prefer.) When
a message box appears confirming that a filter file has been created, click OK to
clear the message.
7. The project window will display one .BIN file for each printer file added. Make a
careful note of the name and ID number for each of the files. You will need them
later.
If you wish to edit the names or ID numbers, double-click the file entry and edit
the details.
Note that the names are case sensitive.
8. Choose Projects > Save Project and enter a meaningful name (e.g. “Letter
Stationery”) so that you can recognize it.
9. Choose Projects > Send Project Files to Printer to download the project to the
printer.
10.When the message “Command Issued” appears confirming that the download is
complete, click OK to clear the message.
Test printing the macro
1. Choose Printers > Test Macro.
2. In the Test Macro window, enter its ID number and click OK. After a short pause
the printer will print the macro.
3. When each macro has been tested, click Exit.
4. Click the standard Windows Close (X) button, or choose Projects > Exit to close
Storage Device Manager.