Moyer Diebel MH-6NM2 - Manual (Page 19)

INITIAL START-UP
17
Check Wash
Water Temperature
The wash tank and booster
tank heaters will begin to heat
the water in the dishwasher.
Wait approximately 10 minutes
for the wash tank water to
reach operating temperature.
The temperature should be a minimum
of 150
°F/66°C for (MH-60, MH-6N).
The MH-6L requires a minimum of
120
°F/49°C. However, a minimum of
140
°F/60°C is optimum for the MH-6L.
Prescrap the dishes. Load ware into
the dishrack. Open the doors, insert the
rack into the dishwasher.
Note that the power indicator
light is illuminated.
THE POWER SWITCH IS
ON DURING INITIAL FILL.
Make sure the doors are fully closed.
Push the On/Off power
switch to the UP position.
THE DISHWASHER FILLS
AUTOMATICALLY.
3
4
5
INITIAL START-UP
(Cont.)