Vpn l2tp/pptp page – Motorola SURFBOARD SVG2500 User Manual
Page 129
10 SVG2500 VPN PAGES
114
VPN L2TP/PPTP Page
This page allows you to configure L2TP and PPTP server options.
Field
Description
PPP Address Range
Start
End
Specify the starting and ending IP address range so that when the
tunnel is set up, the client and server side will get their IP address
from this specified range.
PPP Security
MPPE Encryption
Microsoft Point to Point Encryption (MPPE) is a type of link encryption
used in PPTP. Link encryption means that the data sent along this
tunnel will be encrypted.
You can choose to enable or disable MPPE encryption.
Username
Used to authenticate between the client and the server of the tunnel
that was created between them.
Password
Enter a user password for authentication.
Confirm Password
Enter the password again for confirmation.
Preshared Phrase
Pre shared Phrase — A phrase used to authenticate when the
SVG2500 is acting as a Layer 2 Tunneling Protocol (L2TP) server.