Motorola SURFBOARD SVG2500 - Manual (Page 44)

2 INSTALLATION
29
Installing the Windows Vista USB Driver
1. Insert the SVG2500 Installation CD-ROM in the CD-ROM drive. This CD contains
the USB drivers and must be inserted and read by the PC before you connect the
SVG2500 to the PC.
2. Connect the USB cable as shown in Connecting a PC to the SVG2500 USB Port .
A few seconds after you complete the USB connection, the Found New
Hardware window is displayed.
3. Click Locate and install driver software. The Found New Hardware window for the
SVG2500 USB driver is displayed.