Motorola SURFBOARD SVG2500 - Manual (Page 24)

1 OVERVIEW
9
Rear Panel
The rear panel contains cabling connectors and the power receptacle.
Key Item Description
1 ANT 1
ANT 2 Removable, adjustable antenna. If necessary, contact your Internet
Service provider about obtaining an optional Motorola wireless high gain
antenna to increase your wireless LAN performance and coverage.
2 POWER Use the DC power plug from the SVG2500 DC power supply to connect
to the AC power outlet.
3 CABLE Use the cable connector to connect to the coaxial cable outlet.
4 REBOOT EMTA If you experience a problem, you can push this recessed button to restart
the SVG2500 (for additional information, see
Troubleshooting ). To reset all
values to their defaults, hold down the button for more than five seconds.
Resetting may take 5 to 30 minutes because the SVG2500 must find and
lock on the appropriate communications channels.
5 USB For Windows ® only, use the USB port to connect a PC to the SVG2500.
You cannot connect a Macintosh or UNIX ® computer to the SVG2500
USB port.
6 ETHERNET
1 2 3 4 Use any Ethernet port to connect an Ethernet LAN cable with RJ-45
connectors to an Ethernet-equipped computer, hub, bridge, switch, or
Xbox or PlayStation
® 2 gaming console.
7 TEL 2
TEL1/2 Use to connect a single telephone.
Use to connect a single or two-line telephone.