Motorola SURFBOARD SVG2500 - Manual (Page 33)

18
2 INSTALLATION
The following topics provide information about installing the SVG2500 hardware:
•
Before You Begin
•
Precautions
•
Signing Up for Service
•
Computer System Requirements
•
Installing the Battery
•
Connecting the SVG2500 to the Cable System
•
Cabling the LAN
•
Installing USB Drivers
•
Connecting a PC to the SVG2500 USB Port
•
Obtaining an IP Address for an Ethernet Connection
•
Configuring TCP/IP
•
Installing the Telephone for VoIP
•
Wall Mounting Your SVG2500
For information about WLAN setup, see Setting Up Your Wireless LAN .
Before You Begin
Before you begin the installation, check that the following items were included with
your Motorola SVG2500 Gateway:
Item Description
Power cord Connects the SVG2500 to a power adapter that
connects to an AC electrical outlet
Ethernet cable Connects to the Ethernet port
USB cable Connects to the USB port
Battery Provides standby power for the SVG2500
NOTE: A backup battery is not available for some
models of the SVG2500.
SVG2500 Installation
CD-ROM Contains SVG2500 Installation Assistant, this user
guide, and USB drivers
SVG2500 Quick
Installation Guide Contains basic information for getting started with
the SVG2500