Motorola SURFBOARD SVG2500 - Manual (Page 69)

2 INSTALLATION
54
Wall Mounting Your SVG2500
If you mount your SVG2500 on the wall, you must:
• Locate the unit as specified by the local or national codes governing residential or
business cable TV and communications services.
• Follow all local standards for installing a network interface unit/network interface
device (NIU/NID).
If possible, mount the unit to concrete, masonry, a wooden stud, or some other very
solid wall material. Use anchors if necessary (for example, if you must mount the
unit on drywall).
Do the following to mount your SVG2500 on the wall:
1. See Wall Mounting Template to print a copy of the template.
2. Click the Print icon or choose Print from the File menu to display the Print dialog
box.
The following image is from Adobe ® Acrobat ® Reader ® version 7.0 running on
Windows 2000; there may be slight differences in your version.
To print the template only, select Current page as the Print Range. Be sure you print
the template at 100% scale. Be sure No Scaling is selected for Scale to paper size.
3. Click OK to print the template.
4. Measure the printed template with a ruler to ensure that it is the correct size.
5. Use a center punch to mark the center of the holes.
6. On the wall, locate the marks for the mounting holes.
7. Drill the holes to a depth of at least 1 1/2 inches (3.8 cm).