Motorola SURFBOARD SVG2500 - Manual (Page 40)

2 INSTALLATION
25
Installing the Windows 2000 USB Driver
1. Insert the SVG2500 Installation CD-ROM in the CD-ROM drive. This CD contains
the USB drivers and must be inserted and read by the PC before you connect the
SVG2500 to the PC.
2. Connect the USB cable as shown in Connecting the SVG2500 to the Cable
System .
A few seconds after you complete the USB connection, the Found New
Hardware window is displayed.
3. Click Next to display the Install Hardware Device Drivers window.
Be sure Search for a suitable driver for my device is selected.