Moxa Technologies CP-132U - Manual (Page 18)

CP-132U Series User’s Manual 3-2
Installing the Driver
1. After installing the UPCI/PCI board and powering on your PC, Windows 2003 will auto
detect and find the UPCI/PCI board you just added. The Found New Hardware
window will open in the bottom right corner of the Windows desktop.
2. The Welcome to the Found New Hardware Wizard window will open automatically.
Select Install from a list or specific location (Advanced). Click on Next to continue.
3. Select Search for the best driver in these locations, check Include this location in
the search, and then click on Browse. You should be able to locate the
\Software\Win2K-XP-2003 folder on the software CD. Click on Next to continue.