Moxa Technologies CP-132U - Manual (Page 35)

Software Installation
CP-132U Series User’s Manual 3-19
Windows 2000 Windows XP
Port Configuration
After the driver is installed, the MOXA CP-168U Installation dialog box will be displayed,
and the system will map the ports automatically.
If one MOXA CP-168U board was installed previously, and another MOXA CP-168U
board is added, the system will prompt you to take care of port configuration, which is
discussed in this section.
1. Click on a specific port from the CP-168U Series Installation window, and then click
[Port Setting] to open the Port X dialog box.