Moxa Technologies CP-132U User Manual
Page 23
Software Installation
CP-132U Series User’s Manual 3-7
4. If there are any special marks, such as a question mark or an exclamation mark in front
of the icons, the installation of the board or the ports was not successful. Examine the
Event Log for details.
Port Configuration
After the driver is installed, the MOXA CP-168U Installation dialog box will be displayed,
and the system will map the ports automatically.
If one MOXA CP-168U board was installed previously, and another MOXA CP-168U
board is added, the system will prompt you to take care of port configuration, which is
discussed in this section.
1. Click on a specific port from the CP-168U Series Installation window, and then click
on [Port Setting] to open the Port X dialog box.