Moxa Technologies CP-132U - Manual (Page 64)

CP-132U Series User’s Manual 3-48
3. Press PgDn to configure the port settings, including port number, flow control, etc.
You may enter or modify the settings of each port at this stage. The values displayed
first are the port’s initial values that were set up when installing the driver.
NOTE
Up to this point, you have completed the configuration of CP-134U. You may skip this
step and go directly to step 4 if you do not need to change settings or configure a board.
4. Press F10 to save the modifications and exit the SETUP program.
Legends
In this section we explain the meaning of some of the fields and functions.
Port number
This is the port ID of the port. Application software uses port number (ID) when referring
to a port. Consequently, port numbers must be unique.
Port numbers can be set to any number between 0 and 255 (inclusive). However, you must
ensure that each port is assigned a unique port number. If you are developing your own
application software, then you may want to select port numbers that take into consideration