Moxa Technologies CP-132U - Manual (Page 58)

CP-132U Series User’s Manual 3-42
Configuring Another CP-168U Board
In this section, we explain how to configure another MOXA CP-168U board that is already
installed. Up to four CP-168U boards can be installed in one system under Windows NT,
provided sufficient system resources are available.
In addition to the procedures listed below, you may also click on [Start] Æ [Program] Æ
[MOXA Utility] Æ [MOXA Smartio/Industio Configuration Panel] Æ [Add], and then
refer to the instructions from the previous section, “Installing the Driver.”
1. Open the [Control Panel], click on the [Network] icon, and select the [Adapters] tab.
2. Click on MOXA Smartio/Industio Family Adapter from the Network Adapters list.
3. Click the [Properties] button to open the Moxa Smartio/Industio Configuration Panel
dialog box.