Moxa Technologies CP-132U - Manual (Page 43)

Software Installation
CP-132U Series User’s Manual 3-27
If one MOXA CP-168U board was previously installed and another MOXA CP-168U
board is plugged in, the system will prompt you to skip this stage, and take care of Port
Configuration, which is discussed in the next section.
1. Upon detecting the first new Smartio CP-168U Series board, Windows 95/98 will
automatically display a New hardware found message box, and then display the
following dialog boxes. Click the Next button to proceed.
Windows 95 Windows 98
2. Click [Other Locations]. 2. Select [Display a list...] and then click [Next].