Step 4: configure the modem for your country, The global wizard utility, At commands – Multi-Tech Systems MT5634ZPX-PCI-V92 User Manual
Page 20: The global wizard utility at commands
2 Installation
15
MultiModemZPX User Guide
Step 4: Configure the Modem for Your Country
Before you use your modem, you must configure it for the country in which it will
be used. You must also do this if you move the modem to another country after it has
been configured for the first country. You can use one of two configuration methods:
the Global Wizard utility or AT commands.
The Global Wizard Utility
The Global Wizard configuration utility is recommended for computers running
Windows 95 or newer.
1. Insert the MultiModemZPX CD into the CD-ROM drive. The Autorun menu
should appear.
2. Click Initial Setup and Country Selection.
3. In the Global Wizard dialog box, select either Run from CD or Install on your
PC
. Choose the former to configure your modem without installing the Global
Wizard on your computer. Choose the latter to install the Global Wizard on you
computer and Start menu.
4. Click Next. The Global Wizard searches for your modem and identifies it.
5. Click Next.
6. Select the country in which the modem will be used, and then click Next.
7. Review your choice of country. If it is correct, click Next to configure the modem.
8. When Global Wizard announces that the parameters have been set, click Finish
to exit.
AT Commands
Non-Windows users can configure the modem using AT commands. You must enter
these commands in your communication program’s terminal window.
1. Run your favorite communication program, and open the program’s terminal
window.
2. To configure the modem for a specific country, type AT%T19,0,nn, where nn is
the country code in hexadecimal notation, and then press Enter.
3. To verify the change, type ATI9, and then press Enter. The country code is dis-
played in decimal format.
Example of country, command and result codes
Country
AT command
Result code
(hexadecimal)
(decimal)
Euro/NAM
AT%T19,0,34 (default)
52
Japan
AT%T19,0,10
16
A complete list of country codes can be found on the Multi-Tech Web site at