Multi-Tech Systems MT5634ZPX-PCI-V92 - Manual (Page 24)

3 Operation
19
MultiModemZPX User Guide
· E-mail or POP mail address
· POP server address
· Mail or SMTP address
· News or NNT server address
Dial-Up Networking
Before you can connect to the Internet, you must set up a remote-node client pro-
gram. The Windows version is called Dial-Up Networking. Dial-Up Networking es-
tablishes your connection to the ISP’s server, which is the shared computer that
manages calls from clients (your computer) to the Internet. Most, if not all, Windows
browsers start Dial-Up Networking automatically when you open them.
For instructions on how to set up Dial-Up Networking, consult your ISP or your op-
erating system’s online help or printed documentation. Many ISPs include with their
service a program that will install and configure Dial-Up Networking automatically
for you.
Sending a Fax
You can use the PhoneTools program, which is included with your modem, to send and
receive faxes directly from your computer. The following procedure uses print capture,
which enables you to fax a document directly from the Windows application in
which you created it without opening PhoneTools.
1. Install PhoneTools if it is not already installed.
2. Create a document in a Windows application, such as a word processor, graphic
editor, or spreadsheet. To fax the document, keep the document open and select
the Print command from the File menu.
3. Select CAPTURE FAX BVRP as the printer driver, and then click OK. The Send
Fax wizard appears.
4. In the Recipient section, type the required information or extract it from the
Phone Book by clicking .
5. In the Template section, optionally select a cover page and type a cover message.
6. Select the document to be sent. The default file when sending from within a Win-
dows application is Capture.dgr.
7. Select the date and time to send the document, if you do not want to send it
immediately.
8. Click Finish to start the transmission.