Meco Bonza Deluxe Series - Manual (Page 10)

STEP 2- FIXED LEG/SIDE TABLE ASSEMBLY TOOLS:
•In the same way, attach the Front and Rear Fixed Legs to the remaining Side Table using 1/4” x 1” Bolts (1/4” x 1 3/8”
for Metal Legs.)
•On models with wooden legs, be sure to position Fixed Legs with the four large recessed holes facing away from
Side Table (Fig. C) and the two threaded holes in edge of each leg pointing outward. (Fig. D) Do not tighten bolts
completely. (Metal Tubing Legs can be oriented either way.)
10
1/4” x 1” BOLT
(1/4” x 1 3/8” Deluxe Models)
THREADED HOLES IN LEGS
(Deluxe Models with Metal
legs do not have these
threaded holes.)
FRONT FIXED LEG
THREE VELCRO
PATCHES FACE INSIDE
SIDE TABLE
(Tear Drop Table
Shown)
REAR FIXED LEG
BONZA - WOOD
BONZA DELUXE - METAL
FRONT FIXED LEG
BONZA - WOOD
BONZA DELUXE - METAL
FOUR LARGE
RECESSED HOLES
(Wooden Legs Only)
FIG. C
FIG. D
(ITEM 2 OR 3) SIDE TABLE
(ITEM 11) FRONT FIXED LEG - WOOD
(ITEM 10) REAR FIXED LEG - WOOD
(ITEM 9) 8 pcs
1/4” x 1 3/8” BOLT
(ITEM 8) 8 pcs
1/4” x 1” BOLT
(ITEM 13) FRONT FIXED LEG - METAL
(ITEM 12) REAR FIXED LEG - METAL
OR
OR