Meco Bonza Deluxe Series User Manual
Page 18
STEP 9-INSTALL BOTTOM BODY PANEL/GREASE TRAY- (ALL MODELS)
•In upright position and
drain hole toward the rear,
slide Bottom Body Panel
into guides (See Arrows) at
bottom of Grill Body. Insert
two #8 x 1/2” screws
through the holes in
guides and Bottom Body
Panel; then tighten. Slide
Foil Pan and Grease Tray
all the way into Bottom
Body Panel Brackets.
#8 X 1/2”
SCREW
(2pcs)
BOTTOM BODY PANEL
FOIL PAN
GREASE TRAY
UPPER SHOULDER
GRIDS
The foil pan is a complimentary item and can be purchased at your local grocery.
STEP 9-INSTALL BOTTOM BODY PANEL/GREASE TRAY- (ALL MODELS)
•In upright position and
drain hole toward the rear,
slide Bottom Body Panel
into guides (See Arrows) at
bottom of Grill Body. Insert
two #8 x 1/2” screws
through the holes in
guides and Bottom Body
Panel; then tighten. Slide
Foil Pan and Grease Tray
all the way into Bottom
Body Panel Brackets.
#8 X 1/2”
SCREW
(2pcs)
BOTTOM BODY PANEL
FOIL PAN
GREASE TRAY
UPPER SHOULDER
GRIDS
18
The foil pan is a complimentary item and can be purchased at your local grocery.