Meco Bonza Deluxe Series - Manual (Page 19)

19
•Insert Heat Indicator studs into
Hood holes and secure using two
Lockwashers and two 10-24
Hexnuts. Do not overtighten or you
may crack Hood finish.
STEP 11-ATTACH HANDLE AND HEAT INDICATOR TO HOOD - BONZA MODELS
•Insert two 6mm x 90mm Bolts through recessed holes of Hood Handle, through Handle
Spacers, into front of hood and secure with 6mm Locknuts. Be sure to place the wide end of
Spacer against the Hood. Do not overtighten or you may crack Hood finish.
(ITEM 39 ACTUAL SIZE)
6mm x 90mm BOLT
2 pcs
(ITEM 41) HANDLE SPACER
2 pcs
(ITEM 42) 6mm LOCKNUT
2 pcs
(ITEM 40) HOOD HANDLE
(ITEM 44) LOCKWASHER
2 pcs
(ITEM 45) 10-24 HEX NUT
2 pcs
(ITEM 43) HEAT INDICATOR
LOCKNUT LOCKWASHER 10-24 HEX NUT
SPACERS
HEAT
INDICATOR
6mm x 90mm
BOLT
HOOD HANDLE
TOOLS: