Macsense Connectivity MIH-120 - Manual (Page 16)

Mac OS TCP/IP Configuration
1. Open the TCP/IP control panel.
2. In the Connect via menu select the Ethernet interface that is
installed on your computer.
3. In the Configure pull-down menu that appears, select Using
DHCP Server to allow the built-in DHCP server of the XRouter
to assign an IP address and other TCP/IP configuration infor-
mation to the client automatically. Do this for each client that
needs Internet access through the XRouter.
4. Close the TCP/IP window and save the changes.
12
Easy Installation