Macsense Connectivity MIH-120 User Manual
Page 19
5.
The OnePage Setup window appears. Note that this page is
divided into two basic sections -- Private IP Address, and
Public IP Address.
Host Name - This is an optional section. Some ISPs require a host
name in order to be recognized by their systems. Your ISP should
provide this if needed for their systems.
Private IP Address - This section can be used to change the
XRouter’s internal IP Address that is visible to the client computers on
the LAN. However, we recommend that you do not alter the default IP
address (192.168.1.1) unless you need to make modifications to fit your
network environment.
Public IP Address - This section can be used to manually enter IP
address information provided by your ISP. You will not need to make any
changes to the default values in this section if your ISP automatically
assigns IP addresses. However, if your ISP has provided you with a
static IP address, you will need to enter this information by following the
instructions below.
To make changes to the Public IP Address fields:
1.
Select Specify an IP Address.
15