Macsense Connectivity MIH-120 - Manual (Page 24)

Firmware Upgrade
Macsense is continually improving the firmware (software pro-
grammed on a PROM) in each of its products. The XRouter is shipped
with the most up to date software available at production time. If a
firmware upgrade becomes available, it will be posted in the “Service
and Support” section of our Web site. To upgrade the XRouter, you will
need the TFTP client and the firmware file named “Code.bin.” These
two files can be found on our Web site at www.macsensetech.com.
Follow the upgrade procedure listed below.
1. Download these two files from the firmware updater on our
Web site: TFTP client, and “Code.bin”
2. Double-click the TFTP client icon to run the program. Enter
both the IP address of the XRouter and your password.
3. Click the button beside the File Name field. A window appears.
Select a location of the firmware file “Code.bin”.
4. Click the Upgrade button to begin the upgrade process. After
the upgrade is complete, remember to reset the XRouter by
unplugging the device and then plugging it back in.
(NOTE: Keep the firmware file name ”Code.bin” unchanged
or the TFTP client software won’t recognize it.)
5. If the upgrade has failed, the Ready/Test LED will be blinking
on the XRouter. If this happens, try repeating steps 2 - 4 of
this procedure.
20
Advanced Configuration