Macsense Connectivity MIH-120 - Manual (Page 2)

Copyright
Copyright © 1999 by this company. All rights reserved. No part of
this documentation may be reproduced in any form or by any means
or used to make any directive work (such as translation or transforma-
tion) without permission from Macsense Connectivity, Inc. Macsense
Connectivity, Inc. reserves the right to revise this documentation and to
make changes in content without obligation among Macsense
Connectivity, Inc. to provide notification of such revision or change.
FCC Notice
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide protection against harmful inter-
ference in residential installations. This equipment generates radio
frequencies that may cause interference with radio communications if
not used in accordance with the instructions. Interference may even
occur with proper installation. If this equipment causes interference,
the user is encouraged to correct the interference with one or more of
the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit that is sepa-
rate from the one to which the receiver is connected.
4. Consult the dealer or an experienced radio/television technician
for help.
i