Macsense Connectivity MIH-120 - Manual (Page 3)

Safety Precautions
1. Follow all warnings and instructions marked on the product.
2. Slots and openings on the device are provided for ventilation.
To protect it from overheating, these openings must not be
blocked or covered.
3. Do not use or store this product in an environment that exceeds
temperature and humidity specifications. Do not place this
product near a radiator or heat register, or in a built-in installa-
tion unless adequate ventilation is provided.
4. Before cleaning this product, unplug from wall outlet. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
5. Do not place cords or cables where they may be walked on or
tripped over.
6. Be sure to comply with any applicable local safety standards or
regulations.
7. General purpose cables are provided with this product. Any
cables or other requirements mandated by local authority are
your responsibility.
8. Cables that are attached to devices in different locations that
have different power sources and grounding may have
hazardous voltage potentials. Consult a qualified electrical
consultant before installing the product to see if this
phenomenon exists and, if necessary, take corrective action.
9. Never touch annunciated telephone wires or terminals unless
the line has been disconnected.
10. Avoid using telephone equipment or installing the product
during an electrical storm.
11. Never install telephone jacks, lines, network cables, this
product, or power connections in wet locations.
12. Never spill liquid of any kind on the product.
ii