Minicom Advanced Systems Minicom Smart 116 IP - Manual (Page 15)

USER GUIDE
14
IP address is assigned by the DHCP server
Yes
Unit boots up
To access the configuration page of the unit, open Internet Explorer 6.0
/Firefox 3 or higher and type:
https://IPaddress
Select Configuration
Default user: admin Default password: access
Set static IP
(deselect the DHCP
and set the IP)
Yes
The unit operates with the static IP address
No
Device network setting
is set to obtain IP address from
DHCP Server
Yes
No
Is DHCP Server
present in the
connected LAN?
No
Every 5 minutes
Device IP is:
192.168.0.155
Figure 11 Boot-up process
10.1 Static IP addresses for a number of units
Where you want to connect more than 1 Smart 108/116 IP to the same network and
there is no DHCP server, or you want to use static IP addresses, do the following: