Minicom Advanced Systems Minicom Smart 116 IP - Manual (Page 25)

USER GUIDE
24
From the menu select Firmware Upgrade. The Firmware Upgrade window
appears showing the current firmware version see Figure 20.
Figure 20 Firmware Upgrade
1. Locate and upload the firmware file.
2. Verify the current and uploaded version of the firmware.
3. Click . The upgrade starts. On completion, click .
The unit reboots. After about 30 seconds the Login page appears.
Note!
Depending on the type of firmware upgrade, the following settings may be erased:
User settings, server names, mouse and video adjustments. For more information
refer to the firmware release notes.
The network settings remain intact.
20. Restore Factory Settings
You can restore the Smart 108/116 IP unit KVM/IP portion to the factory settings.
This restores the original Smart 108/116 IP parameters, resetting all the
information added by the administrators, including: Network settings*, Servers,
Switches, Users, Passwords etc.
(The OSD preserves the server names and other settings. Restore the OSD settings
from the OSD, see page 43).
* You have the option to preserve Network settings – explained below.
Warning! Once reset the data cannot be retrieved.
To restore factory settings:
1. From the menu select Restore Factory Settings. Restore Factory Settings
appears see Figure 21.
Figure 21 Restore factory settings