Minicom Advanced Systems Minicom Smart 116 IP - Manual (Page 55)

USER GUIDE
54
with a .min extension. The correct firmware is automatically selected
according the Switch or RICC/ROCC chosen in step 1 above. The file
extension for specific devices is .hex.
Figure 52 Open dialog box
4. Open the file.
5. Click Start. The Smart 108/116 IP Switch Update flashes the firmware. On
completion the firmware version number appears.
Note! If the status of the device is busy - see the bottom of Figure 48 - the system
cannot be upgraded. To free the device choose Options/Advanced/Reset. The
device resets and the status is now free. Click Start.
6. Check that the updated version number is correct by pressing .
26.9 Restoring factory settings
You can restore the OSD to the factory settings from the Update software.
Note! All changes made (passwords, access rights, names etc.) will be removed.
To restore the OSD factory settings:
Select Options/Advanced/Set default. The OSD returns to the factory default
settings.
(You can also restore the OSD from the OSD (F7), see page 43).