IBM Partner Pavilion iLV300 - Manual (Page 15)

2. Connect the other end to the video port on your computer, as shown in
Figure 2-3 on page 2-2. If you are using a desktop computer, you will need to
disconnect the monitor cable from the computer video port first.
3. Connect the black power cord to the Power connector on the side of the
projector and to your electrical outlet, as shown in Figure 2-4.
Note: Only use the power cord that was shipped with the projector.
For more information on using the projector with a video device, see “Connecting
a video device” on page 3-1.
Optional computer connections
To have sound with your presentation, connect the audio cable to your computer
and to the Audio In connector on the projector, as shown in Figure 2-5.
If you are using a desktop computer and want to see the image on your computer
screen as well as on the projection screen, connect the monitor cable from your
computer to the Computer In connector. Then, connect the computer monitor cable
to the Monitor Out connector on the projector, as shown in Figure 2-6 on page 2-4.
Figure 2-4. Connecting the projector to an electrical outlet
Figure 2-5. Connecting the audio cable
Chapter 2. Setting up the projector 2-3