IBM Partner Pavilion iLV300 User Manual
Page 18
Note:
Avoid placing your hands near the hot exhaust vent in front of the
projector.
3.
Position the projector the desired distance from the screen at a 90° angle to the
screen. See Table 2-1 on page 2-7 for a listing of screen sizes and distances.
4.
Adjust the zoom or focus on the projector.
5.
If the image is not square, adjust the keystone using the buttons on the keypad.
Press the top Keystone button to reduce the upper part of the image, and press
the bottom Keystone button to reduce the lower part. Figure 2-12 on page 2-7
shows an illustration of the Keystone buttons on the projector keypad.
Figure 2-9. Rotating leveling foot
1 Zoom (thick ring)
2 Focus (thin ring)
Figure 2-10. Zoom and focus
Figure 2-11. Adjusting the keystone
2-6
IBM iLV300 Value Data/Video Projector: User’s Guide