Intermec NORAND 6642 - Manual (Page 58)

SECTION 5 Connecting Peripheral Equipment
5-3 PEN*KEY
R
6642 Pen Computer User’s Guide
Connectors
Figure 5Ć2
Side View Connections
Floppy Drive/Port Expander
USB Connector
Audio I/O
DC Power In
Floppy Drive/Port Expander
1. Open the floppy drive/port expander cover on the right
side of the pen computer.
2. Connect the cable from the floppy drive/port expanderĆ
to the 6642 port expander connector.
3. Connect the desired peripheral device (PS/2, parallel
or serial peripheral) to the floppy drive/port expander.
4. Apply power to the peripheral, if applicable, then the
6642.
Audio I/O
An internal mini speaker provides audio output from the
integrated PCI audio controller on board the 6642. A
2.5mm bayonet socket connector allows for external microĆ
phone input, and headphone outputs.