Intermec NORAND 6642 - Manual (Page 63)

SECTION 5 Connecting Peripheral Equipment
5-8 PEN*KEY
R
6642 Pen Computer User’s Guide
Logical Port
For some software, you may have to change the assignment
of the logical port.
1. In the IR dialog box, select Ports.
2. Change the settings and tap OK.
3. When the message You have changed the infrared
communication port appears, tap OK.
Disabling IR Communication
For IrDA communication to take place, the 6642 is continuously
transmitting an Infrared signal to search for other IR devices.
You can disable the IR transmissions by doing the following:
1. In the Start menu, select Settings, Control Panel.
2. Double-tap on the IR icon.
3. Turn off the infrared communication and tap OK.
Communication with a PC
To communicate with a personal computer:
1. Right tap on the file you want to send.
2. Select Send To - Infrared Recipient.
The file you send will be saved in My Received Files in the
C: drive of the target personal computer.
If you have trouble sending the file, confirm that your pen
computer and the target computer are located correctly.
Double-tap My computer - Infrared Recipient, and check
whether the name of the target computer appears in AvailĆ
able infrared devices within range. If not relocate your comĆ
pouter and the target computer.