Intermec NORAND 6642 - Manual (Page 62)

SECTION 5 Connecting Peripheral Equipment
5-7 PEN*KEY
R
6642 Pen Computer User’s Guide
IrDA Communications
The IR (infrared) port provides wireless file transfer between
the 6642 and an IR-equipped computer or device. You can also
print to an IR-equipped printer without connecting a printer
cable.
The IR mode supports two transfer rates: standard IR (SIR)
mode at 115.2Kbps and Fast IR (FIR) mode at 4Mbps.
Figure 5Ć4
IrDA Port
Preparing the 6642 and the Target Device
1. Place the pen computer on a flat surface.
2. Position the target device so that its IR port is in a direct
line of sight with that of the pen computer.
3. Adjust the distance between the IR ports to be less
than 20 inches (50 cm).
Settings for Infrared Communication
1. In Control Panel, select Infrared Monitor, Options and
enable infrared communication.