Intermec NORAND 6642 - Manual (Page 71)

SECTION 6 Troubleshooting
6-4 PEN*KEY
R
6642 Pen Computer User’s Guide
Why is the image on the external monitor display distorted?
"
Check that the monitor is connected correctly.
"
Make sure the CRT is not near any electric devices
that have a stong magnetic fields such as a TV set, fan
or radio.
"
Do not share an outlet with a TV set or radio.
"
Make sure the value of the Screen area in the Display
Properties in Control Panel is equal to or lower than the
resolution of the CRT monitor.
Problems with Hard Disk
Why can't I read or write data to or from the hard disk?
"
Confirm the drive and file names are correct.
"
Confirm the hard drive has enough free space.
"
The hard disk in your computer is formatted with
FAT32. You cannot read or write data formatted in
other operating systems which are not FAT32 compatĆ
ible. Applications not FAT32 compliant may not work
properly.
Problems with Floppy Disk
Why can't I use a floppy disk?
"
Confirm that the external floppy disk drive/port expander
is correctly connected.
"
Check that the floppy disk is inserted correctly.
"
The floppy disk may be unformatted or corrupt.
"
If you cannot write to a floppy disk, the disk may be
write-protected. Eject the disk and check that the
write-protect tab covers the detection hole.
"
If you cannot write to a floppy disk, the disk may be
full. Use another disk.
"
Check that the floppy disk drive setting is set to
1.44MB in the setup utility.