Intermec NORAND 6642 - Manual (Page 65)

SECTION 5 Connecting Peripheral Equipment
5-10 PEN*KEY
R
6642 Pen Computer User’s Guide
Removing a PC Card
"
1) Tap the PC Card" icon in the system tray.
"
2) Tap on the Stop" message that appears.
"
3)Tap ATA device dialog box and wait for [OK].
"
4) Press the PC card slot eject button. When the edge
of the card pops out of the slot, pull out the card and
store it properly.
Figure 5-6
Removing the PC Card
"
NOTE: For Network PC Cards, first disable the device under the Windows
95/98 Control Panel, otherwise this may cause system problems.