Outside calls, Placing outside calls – Inter-Tel AXXESS IP MODE 8620 User Manual

Page 26

Advertising

GETTING S

Axxess

Model 8620 Phone User Guide – Axxess IP Mode

Outside Calls

With outside calls, you can talk to people who aren’t members of your phone system.
When you make an outside call, however, you must dial any area codes or long dis-
tance digits that your telephone company requires.

Placing Outside Calls

To place an outside call:

With or without the handset lifted, press

Dial the desired number.

NOTE:

If you see a request for an account code and hear a single beep, you must

dial an account code before you can place your call (see

page 51

Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of pressing the

but-

ton:
• Dial the Outgoing Call feature code (default is

• Press an unlit

button, if you have one.

• Dial a Select Line Group feature code (the defaults are 92001-92208).
• Dial the Automatic Route Selection (ARS) feature code (the default is 92000).

NOTE:

Check with your system administrator to see if your system uses custom-

ized feature and access codes.

To request a callback (queue on to the line) if all outgoing lines are busy when you

try to call out:
When you hear busy signals, press

and hang up. When the line is available, your

phone rings.
To cancel the queue request before your phone rings:
Press

When dialing the number, you can do one of the following:
• Use the speed-dial directory. See

page 55

• Use the Station Speed-Dial feature. See

page 46

• Use the System Speed-Dial feature. See