IBM PS1500 - Manual (Page 18)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1•2 User Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
THE INITIAL STATUS (DEFAULT)
After turning on, PS1500 sets to Style/Preset
mode with the Grand Piano preset ready to play
across the full keyboard.
The main display shown a short period after
powering up corresponds to the GRAND PIANO
Preset. PS1500 defaults to this mode every time
you turn on the instrument.
The display shows the name of the current Style
and Preset, the tempo and the sounds assigned
to the three keyboard sections (Upper 1, Upper
2, Lower).
Let’s go through some of the basic operations
that you can carry out after powering up.
178 SoulBB *********** Bk1: SLOSTR
GPiano POP Bk1: SLOSTR Bk1: PIANO1
The initial status / Adjusting the General Volume
ADJUSTING THE GENERAL VOLUME
Adjust the general volume with the MASTER
VOLUME panel slider.
A comfortable level is around two thirds of the
slider’s travel distance.
If you are using external amplification, better re-
sults are obtained by adjusting the volume with
mixer or amplifier controls rather than lowering
the volume of the instrument.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ WARNING: Playing at high volume levels
could be harmful to your hearing and could
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
damage the amplifier and speakers.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ Note: If no sound is heard, check that the
cable running from the speaker box is properly
connected to the SPEAKERS jack on the rear
panel of the instrument. This applies to PS1500
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
models with a speaker box under the keyboard.
MAX
MIN
MASTER MIC / LINE
VOLUME
****** Pianovelle PS1500 ******
copyright 1996 Baldwin