IBM PS1500 - Manual (Page 71)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sounds & Presets 4•7
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
USE PAGE+/BANK+ AND PAGE–/BANK–
TO SELECT THE PRESETS
You can select Presets in increasing or decreas-
ing order with the Page+/Bank+ or Page–/Bank–
buttons.
1. Press PAGE+/BANK+ select the next Preset.
The Preset advances one step. Press the
same button repeatedly to scroll through the
Presets in increasing order.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ Note: This operation is valid only for the
Presets of the PROGRAMMABLE PRESETS.
Once you reach the last Preset of button 8 with
Page+, it is not possible to proceed. Similarly,
when you select Presets in decreasing order, once
you reach the first Preset of button 1 with Page-,
you cannot proceed further. With the GRAND
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PIANO PRESET, the Page buttons are disabled.
Selecting Presets
1
2
PAGE+ / BANK+
PAGE– / BANK–
Preset 2
PAGE+ / BANK+
PAGE– / BANK–
Preset 3
PAGE+ / BANK+
PAGE– / BANK–
Preset 4, etc.....
PAGE+ / BANK+
PAGE– / BANK–
PAGE+ / BANK+
PAGE– / BANK–
PAGE+ / BANK+
PAGE– / BANK–
Preset 3
Preset 2
Preset 1
2. Press PAGE–/Bank– to select the previous Pre-
set.
The previous Preset is selected. Press the
same button repeatedly to scroll through the
Presets in decreasing order.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ Note: You can assign one of the programmable
pedals to perform this operation. “Pedal Function
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
assign” «Edit General».
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ Hint: If you programme your Presets to change
Styles (with Style Lock off), you can change Styles
using the Page+/- buttons, or an appropriately
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
programmed Pedal (Preset+ or Preset-).