IBM PS1500 - Manual (Page 67)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sounds & Presets 4•3
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
d *********** Bk1: STRING
T Bk1: SLOSTR Bk1: PIANO1
Selecting Single Sounds
A
UPPER 2
UPPER 1
LOWER
S
E
L
E
C
T
1
d *********** Bk1: STRING
T Bk1: SLOSTR Bk1: PIANO1
B UPPER 2
UPPER 1
LOWER
S
E
L
E
C
T
d *********** Bk1: STRING
T Bk1: SLOSTR Bk1: PIANO1
C UPPER 2
UPPER 1
LOWER
S
E
L
E
C
T
2
Bk1 PIANO2 HONKY EL.PN2 CLAVIN
PIANO1 PIANO3 EL.PN1 HARPSI
REED
PIANO MALLET
FLUTE
ORGAN
SYN LEAD
GUITAR
SYN PAD
BASS STRINGS
SYN SFX ETHNIC
ENSEMBLE
PERCUSSIVE
BRASS
SFX
SOUND GROUPS
Selecting Single Sounds
To assign a Sound to a keyboard track (Upper 1,
Upper 2 or Lower) in Style/Preset mode, you must
first select the track with the SELECT buttons
(Upper 2, Upper 1; Lower) located to the right of
the display. The SELECT buttons enable the dis-
played keyboard tracks for a Sound change. A
selected track is shown flashing and only one
section at a time can be in an enabled state. A
selected track (flashing) is not necessarily active
for play.
To assign a Sound to any track, including one
not displayed and regardless of the current mode,
you must first enter Edit Preset mode (press the
Preset button) to enter the ProgramChange page.
The procedure is explained in detail on page 11.
Assign a Sound to a keyboard track
1. Press one of the SELECT buttons.
A Press UPPER 2 to select the Upper 2 key-
board track;
B Press UPPER 1 to select the Upper 1 key-
board track;
C Press UPPER 1 + UPPER 2 together to
select the LOWER keyboard track.
2. Press a SOUND GROUPS button.
The display shows a bank of 8 Sounds be-
longing to the selected Group. The current
Sound Bank is shown in the top left hand
corner of the display.
d *********** Bk1: STRING
T Bk1: SLOSTR Bk1: PIANO1