IBM PS1500 - Manual (Page 87)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sounds & Presets 4•23
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Restore Preset
RESTORING THE ORIGINAL PRESET SET-
TINGS
Is it possible to cancel all modifications made to
the Presets and restore factory settings.
1. Press RESTORE in the SYSTEM section.
The RESTORE ORIGINAL BLOCK display
activates.
1
2
RESTORE
1/1 RESTORE ORIGINAL BLOCK [Release]
All Seq Preset [01-09-97]
F1 F2 F3 F4 F5 F6 F7 F8
RESTORE ORIGINAL " PRESET "
Are you sure? Press [ENT] or [ESC]
3
ENTER ESCAPE
2. Press F7 or F8 to select the PRESET command.
The display shows “Restore Original Preset”.
3. Press ENTER to confirm the Restore Preset pro-
cedure, or ESCAPE to cancel.
All the changes stored to the Presets of the
PROGRAMMABLE PRESETS section are
cancelled. The original ROM settings of all
the Preset parameters are restored.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ Hint: If you want to cancel the entire contents of
RAM in a single operation, use the “Restore ALL”
command. Be sure, however, to save all data that
you wish to conserve to disk before confirming the
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
operation.