Intellinet Network Solutions UNC-W10 - Manual (Page 18)

WIRELESS NETWORK IP CAMERA User’s Guide
Assigning IP Address by using Hyper Terminal
You can assign an IP address by using Hyper Terminal. In this case, you should configure Hyper
Terminal first
Configuring Hyper Terminal
Hyper Terminal is a basic program for Windows 9x/NT/2000. A PC can communicate with external
devices through the serial port by using this program. The steps you should take to set the Hyper
Terminal are as follows in the case of Windows 2000 OS:
17
① Start Æ Programs Æ Accessories Æ
Communications Æ Hyper Terminal.
Select one of the icons and then enter an
appropriate name in the box.
② Select a serial port of PC, then click “OK”
button. (Usually COM1 or COM2 is
recommended)