Intellinet Network Solutions UNC-W10 - Manual (Page 66)

WIRELESS NETWORK IP CAMERA User’s Guide
① Confirm that the Wireless Network IP Camera is connected
to your PC. (As long as you can access your
Wireless Network IP Camera Homepage,
you can process upgrading)
② Execute the newly updated firmware.
③ Enter Camera’s IP address, Upgrade
port number, Admin ID and Password configured
on the Network Configuration page.
And then press “start upgrade” button.
You may see the upgrading status.
Upgrading levels are divided into 4 steps from the step of
“Transferring Firmware” to “Verify flash memory”.
(Each step is indicated on progress bar)
④ When completed upgrading, a message appears
indicating the upgrade has been completed.
Click the “OK” button.
65