Intellinet Network Solutions UNC-W10 - Manual (Page 52)

WIRELESS NETWORK IP CAMERA User’s Guide
51
User can access the camera image via HTTP directly.
5. Image file name (max 10 characters)
Set the image file name.
6. PTZ control
This is to configure PTZ control mechanism of Wireless Network IP Camera.
You may select PTZ control enable or disable.
7. PTZ controller Section
This is to choose the PTZ controller connecting to the Wireless Network IP Camera.
8. System Information
This is to check system information for Wireless Network IP Camera. You may see the model name,
serial no., Mac no., and Bootrom & Firmware version. (please refer to the Chapter ‘ Appendix E.
Updating Firmware.)